 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05245 PLR0502 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS Ethernet - 10/100 Base T FireWire Wireless Communications USB Interface IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns 61000-4-5 (Surge): 24A, 8/20s - Level 2(Line-Gnd) & Level 3(Line-Line) SOT-543 FEATURES 200 Watts Peak Power per Line (tp = 8/20s) ESD Protection > 25 kilovolts Low Clamping Voltage Unidirectional Configuration Protects 2 I/O Ports & Power Supply Ultra-Low Capacitance: 0.6pF RoHS Compliant MECHANICAL CHARACTERISTICS Molded JEDEC SOT-543 Weight 3 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 8mm Tape and Reel Per EIA Standard 481 Marking: Marking Code PIN CONFIGURATION GND 1 4 REF I/O 2 3 I/O 05245.R1 2/07 1 www.protekdevices.com PLR0502 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20s) - See Figure 1 Operating Temperature Storage Temperature Peak Forward Voltage - IF = 1A, 8/20s SYMBOL PPP TL TSTG VF VALUE 200 -55 to 150 -55 to 150 1.5 UNITS Watts C C Volts ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 2) 8/20s VC @ IPP VOLTS 20.0V @ 10.0A MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE (See Note 1) (See Fig. 5) (Per Data Line) @0V, 1 MHz CJ(SD) pF 0.6 V WM VOLTS PLR0502 B5 5.0 @ 1mA V(BR) VOLTS 6.0 MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 2) @ IP = 1A VC VOLTS 9.8 @ VWM ID A 1.0 Note 1: As shown in Figure 5, REF 1 is connected to ground, REF 2 is connected to +VCC and input applies to VCC = 5V, Vsign = 30mV, F = 1MHz. Note 2: Measured across pin 1 to pin 4. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8s td = 20s 1,000 200W, 8/20s Waveform 100 e-t td = t I /2 PP 10 0.01 1 10 100 td - Pulse Duration - s 1,000 10,000 0 5 10 15 20 t - Time - s 25 30 05245.R1 2/07 2 www.protekdevices.com PLR0502 GRAPHS FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20s 100 80 % Of Rated Power 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - C 150 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE 20 5 Volts per Division 10 0 -10 -20 ESD Test Pulse: 5 kilovolt, 1/30ns (waveform) FIGURE 5 INPUT CAPACITANCE CIRCUIT REF2 I/O +VCC VSIGN G REF1 05245.R1 2/07 3 www.protekdevices.com PLR0502 SOT-543 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE PACKAGE DIMENSIONS A R 3 B C K DIM A B C D G H J K R NOTES MILLIMETERS MIN MAX 1.50 1.10 0.50 0.17 0.50 BSC 1.50 0.08 0.10 0.05 1.70 1.30 0.60 0.27 1.70 0.16 0.30 0.15 INCHES MIN MAX 0.059 0.043 0.020 0.007 0.020 BSC 0.059 0.003 0.004 0.002 0.067 0.051 0.024 0.011 0.067 0.007 0.0120 0.006 4 H 1 2 D G Do not connect center stub. MOUNTING PAD TYPICAL DIM Millimeters Inches 1 2 3 4 0.30 1.02 1.40 0.51 0.012 0.040 0.055 0.020 J 1. 2. 3. 4. Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PLR0502-T7. 3. Suffix - LF = Lead-Free Plating, i.e., PLR0502-LF-T7. 3 2 4 1 Outline & Dimensions: Rev 0 - 1/07, 06071 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7") Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 1.78 0.05 1.78 0.05 0.69 0.05 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05245.R1 2/07 4 |
Price & Availability of PLR0502
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |